#Formcure

شاهد فيديو ريلز عن Formcure من أشخاص حول العالم.

شاهد بشكل مجهول دون تسجيل الدخول.

ريلز رائجة

(12)
#Formcure Reel by @infinityflow3d - If your first layers feel random, they're not.

Every print leaves behind residue. Every time you touch the plate, you add oils. And when you clean wi
25.7K
IN
@infinityflow3d
If your first layers feel random, they’re not. Every print leaves behind residue. Every time you touch the plate, you add oils. And when you clean with low-grade alcohol, you’re often just smearing it around instead of actually removing it. Then nothing sticks — and it feels like your printer is the problem. We dealt with the same thing. Prints would stick perfectly one day and lift the next. Before changing temps, filament, or hardware, we made one simple switch: 70% alcohol → 99% alcohol. That alone fixed it. First layers went down consistently, adhesion issues disappeared, and we stopped chasing settings. If you or someone you know is fighting “random” adhesion problems, try this before changing anything else. #3dprinting #3dprinter #3dprint #3dprinted #3dprintinglife #prusa #filament #ultimaker #automation #additivemanufacturing #printfarm #thingiverse #prototyping #3dprintable #infinityflow3d #mechanicalengineering #designengineer #technology #innovation #3dmodeling
#Formcure Reel by @inslogic3d - Struggling with prints that split between layers?

Learn how to reduce layer separation in this video. 👇

🖨 inslogic3d.com
🛒store.inslogic3d.com

#
48.3K
IN
@inslogic3d
Struggling with prints that split between layers? Learn how to reduce layer separation in this video. 👇 🖨 inslogic3d.com 🛒store.inslogic3d.com #inslogic #inslogic3d #3dprinting #additivemanufacturing #3dprints #3dprintingcommunity #3dprintinglife #3dprintingservice #3dprintingindustry #3dprintedmodels #printer3d #3dprintingnerd #thingiverse #3dprintingideas #3dprintable #3dmodels #3dmodel #objectdesign #3dfilament #filament #plafilament
#Formcure Reel by @emberprototypes - My new favorite resin printing tip 😁 

If you print lots of flat parts you know how annoying it is to wash them properly and not have them stick toge
6.7K
EM
@emberprototypes
My new favorite resin printing tip 😁 If you print lots of flat parts you know how annoying it is to wash them properly and not have them stick together 🫠 Adding tabs beforehand makes the post processing super easy and if they're small enough they break off with zero to no cleanup 🔥 These are Tough 1500 parts printed on the @formlabs Form 4L 💪 #3dprinting #additivemanufacturing #tipsandtricks #emberprototypes #manufacturing
#Formcure Reel by @emberprototypes - My wife thought the music selection here was hilarious. Thank you for your input wifey 😅

Finally getting Silicone to work reliably on the @formlabs
2.7K
EM
@emberprototypes
My wife thought the music selection here was hilarious. Thank you for your input wifey 😅 Finally getting Silicone to work reliably on the @formlabs 4L. Printing out more torture tests over the next little while and then will need to put it all together on YouTube 💪 #3dprinting #additivemanufacturing #silicone #formlabs #rapidprototyping
#Formcure Reel by @drifts_tech (verified account) - .
#fdm 
#sla 
#cnc 
#3dart 
#3dprint 
3ddesign 
3dprinted 
dprinting 
3dprinter 
3dprinting 
designin3d 
innovation 
techtrends 
3dmodeling 
prototypi
693
DR
@drifts_tech
. #fdm #sla #cnc #3dart #3dprint 3ddesign 3dprinted dprinting 3dprinter 3dprinting designin3d innovation techtrends 3dmodeling prototyping engineering creativetech 3dtechnology makermovement manufacturing productdesign techcommunity techinnovation printyourfuture 3dprintedmodels rapidprototyping digitalfabrication additivemanufacturing futureofmanufacturing sustainablemanufacturing
#Formcure Reel by @infinityflow3d - If you've ever had one print stick perfectly… and the next one randomly lift or warp, it's probably not your settings.

We were tweaking temps, swappi
26.3K
IN
@infinityflow3d
If you’ve ever had one print stick perfectly… and the next one randomly lift or warp, it’s probably not your settings. We were tweaking temps, swapping filament, even questioning the printer — until we realized the issue was way simpler. We were cleaning the bed with 70% alcohol. That leftover water content was spreading residue instead of fully removing it. We switched to 99% alcohol — same printer, same temps, same filament — and adhesion problems disappeared. Now parts stick hard and release only when we want them to. Before you change hardware or chase settings, try this first. It might be the easiest fix you’ll ever make. #3dprinting #3dprinter #3dprint #3dprinted #3dprintinglife #prusa #filament #ultimaker #automation #additivemanufacturing #printfarm #thingiverse #prototyping #3dprintable #infinityflow3d #mechanicalengineering #designengineer #technology #innovation #3dmodeling
#Formcure Reel by @emberprototypes - My new favorite resin printing tip 😁 

If you print lots of flat parts you know how annoying it is to wash them properly and not have them stick toge
4.4K
EM
@emberprototypes
My new favorite resin printing tip 😁 If you print lots of flat parts you know how annoying it is to wash them properly and not have them stick together 🫠 Adding tabs beforehand makes the post processing super easy and if they're small enough they break off with zero to no cleanup 🔥 These are Tough 1500 parts printed on the Formlabs Form 4L 💪 #3dprinting #additivemanufacturing #tipsandtricks #emberprototypes #manufacturing
#Formcure Reel by @infinityflow3d - Overnight failures usually aren't random.

They start with something small - a bent filament end or a taped spool. The printer keeps pulling, resistan
411.4K
IN
@infinityflow3d
Overnight failures usually aren’t random. They start with something small — a bent filament end or a taped spool. The printer keeps pulling, resistance spikes, and then… grinding, clogs, ruined print. That spike in force happens right before the failure. Instead of waiting for the jam, this cutter reacts to that force instantly and trims the bad section before it reaches the extruder. The printer can switch rolls or pause cleanly instead of destroying a 16-hour job. No electronics. No firmware. Just physics. If filament jams are killing your long prints, this is what fixes it. #3dprinting #3dprinter #3dprint #3dprinted #3dprintinglife #filament #automation #additivemanufacturing #printfarm #3dprintable #infinityflow3d #technology #innovation #makers #infinityflow3d
#Formcure Reel by @emberprototypes - My wife thought the music selection here was hilarious. Thank you for your input wifey 😅

Finally getting Silicone to work on the Formlabs 4L. Printi
178
EM
@emberprototypes
My wife thought the music selection here was hilarious. Thank you for your input wifey 😅 Finally getting Silicone to work on the Formlabs 4L. Printing out more torture tests over the next little while and then will need to put it all together on YouTube 💪 #3dprinting #additivemanufacturing #silicone #formlabs #rapidprototyping
#Formcure Reel by @inslogic3d - How to prevent warping in 3D printing?

👉Here are 3 key tips to reduce it and improve your overall print quality. Check out this practical guide.

🖨
19.7K
IN
@inslogic3d
How to prevent warping in 3D printing? 👉Here are 3 key tips to reduce it and improve your overall print quality. Check out this practical guide. 🖨 inslogic3d.com 🛒store.inslogic3d.com #inslogic #inslogic3d #3dprinting #additivemanufacturing #3dprints #3dprintingcommunity #3dprintinglife #3dprintingservice #3dprintingindustry #3dprintedmodels #printer3d #3dprintingnerd #thingiverse #3dprintingideas #3dprintable #3dmodels #3dmodel #objectdesign #3dfilament #filament #plafilament
#Formcure Reel by @emberprototypes - Another day, another medical device prototype 💪

Printed in clear V5 on the @formlabs Form 4L

#3dprinting #additivemanufacturing #resinprinting #for
3.3K
EM
@emberprototypes
Another day, another medical device prototype 💪 Printed in clear V5 on the @formlabs Form 4L #3dprinting #additivemanufacturing #resinprinting #formlabs #manufacturing
#Formcure Reel by @emberprototypes - Another day, another medical device prototype 💪

Printed in clear V5 on the @formlabs Form 4L

#3dprinting #additivemanufacturing #resinprinting #for
359
EM
@emberprototypes
Another day, another medical device prototype 💪 Printed in clear V5 on the @formlabs Form 4L #3dprinting #additivemanufacturing #resinprinting #formlabs #manufacturing

✨ دليل اكتشاف #Formcure

يستضيف انستقرام thousands of منشور تحت #Formcure، مما يخلق واحدة من أكثر النظم البصرية حيوية على المنصة.

#Formcure هو أحد أكثر الترندات تفاعلاً على انستقرام حالياً. مع أكثر من thousands of منشور في هذه الفئة، يتصدر صناع المحتوى مثل @infinityflow3d, @inslogic3d and @emberprototypes بمحتواهم الفيروسي. تصفح هذه الفيديوهات الشائعة بشكل مجهول على Pictame.

ما هو الترند في #Formcure؟ أكثر مقاطع فيديو Reels مشاهدة والمحتوى الفيروسي معروضة أعلاه.

الفئات الشعبية

📹 اتجاهات الفيديو: اكتشف أحدث Reels والفيديوهات الفيروسية

📈 استراتيجية الهاشتاق: استكشف خيارات الهاشتاق الرائجة لمحتواك

🌟 صناع المحتوى المميزون: @infinityflow3d, @inslogic3d, @emberprototypes وآخرون يقودون المجتمع

الأسئلة الشائعة حول #Formcure

مع Pictame، يمكنك تصفح جميع ريلز وفيديوهات #Formcure دون تسجيل الدخول إلى انستقرام. لا حساب مطلوب ونشاطك يبقى خاصاً.

تحليل الأداء

تحليل 12 ريلز

✅ منافسة معتدلة

💡 المنشورات الأفضل تحصل على متوسط 127.9K مشاهدة (2.8× فوق المتوسط)

انشر بانتظام 3-5 مرات/أسبوع في الأوقات النشطة

نصائح إنشاء المحتوى والاستراتيجية

🔥 #Formcure يظهر إمكانات تفاعل عالية - انشر بشكل استراتيجي في أوقات الذروة

📹 مقاطع الفيديو العمودية عالية الجودة (9:16) تعمل بشكل أفضل لـ #Formcure - استخدم إضاءة جيدة وصوت واضح

✍️ التعليقات التفصيلية مع القصة تعمل بشكل جيد - متوسط الطول 492 حرف

عمليات البحث الشائعة المتعلقة بـ #Formcure

🎬لمحبي الفيديو

Formcure Reelsمشاهدة فيديوهات Formcure

📈للباحثين عن الاستراتيجية

Formcure هاشتاقات رائجةأفضل Formcure هاشتاقات

🌟استكشف المزيد

استكشف Formcure