77.0K
ROA frequently asked question I get when clients are doing a kitchen renovation is:
“What size should my drawer pulls be?”🤔
For kitchen drawers, a good rule of thumb in general is to choose pull lengths that are approximately one-third the width of the drawer front. If you have wider drawers, consider using two pulls or longer pulls.
Here’s a more detailed breakdown 👇🏻
🌿The “One-Third” Rule:
This guideline helps create a visually pleasing and balanced look. For example, a 30-inch drawer would ideally have a 10-inch pull (30 / 3 = 10).
🌿Smaller Drawers:
For drawers 12 inches or less, pulls between 3 and 4 inches long or knobs with a 1-inch diameter often work well.
🌿Larger Drawers:
For drawers 30 inches or wider, consider pulls longer than 8 inches or knobs with a 1-inch diameter or greater. You can also use two pulls or knobs on larger drawers.
🌿Modern Look:
For a more contemporary look, you can choose pulls that are half to three-quarters the width of the drawer front or the height of a door.
🌿Spacing:
When using two pulls, divide the drawer width into thirds and center the pulls on those lines.
🏡 Save this post for later and share with someone who might need these tips.
🏡 Follow along for more interior design ideas and tips!
#interiordesigntips #kitchenhardware #kitchenrenovation #homedecortips #cabinethandle #cabinethardware #ruleofthirds #drawerpulls
@room_remedies
