527
TRAluminium Gear milling on our TRIMILL VS 1614 (5-axis, tilting-rotary table) – captured during our Open House. 🔴
Want to see your part on our machine next?
Send us your drawing and let’s talk test machining.
@trimill_machine_tools
#Millturn
Смотрите Reels видео о Millturn от людей со всего мира.
Смотрите анонимно без входа.
Трендовые Reels
(12)
16
FFMU-650 IN STOCK - NO TARIFFS - AVAILABLE FOR IMMEDIATE DELIVERY
**Limited availability – First come, first serve!
Standard features of #FFG's MU-650 include:
- 5-axis Simultaneous Machining Capability
- 12,000 RPM Direct-Drive Spindle
- Direct Driven Table
- 40T Magazine
- Digital Twin Function
Contact to learn more:
- Gerald Turner at gerald.turner@mag-ias.com or call (248) 496-8912
- Michael Judge at michael.judge@mag-ias.com or (616) 340-3140
#LEADWELL #5Axis #VMC #Milling
@ffgamericas
694
MO🔹 Test #machining an #aluminum #extrusion 🔹
The #HHV is a universal machining center built for bar stock and extrusion components. It is perfectly suited for short production runs, nested parts, or high-volume manufacturing. Raw material is loaded from the left side, where the HHV automatically positions it for machining and transfers finished parts into a part catcher.
Unlike traditional methods that require cutting raw material to specific lengths before machining, the HHV works directly with full-length bars and extrusions. This process reduces setup time, eliminates the need for workholding, and shortens cycle times dramatically.
With the HHV, parts are completed in a single setup with maximum precision and efficiency - a smarter way to machine.
💡Learn more at: https://hubs.li/Q03QxJq-0
#modig #modigmachinetool #hhv #extrusionmachining #barmachining #turnkey #turnkeysolutions #completeproductioncells #automationsystems #AllFromOneSource #4axis #5axis #cncmachine #aerospace #innovation #technology #themodigway
@modigmachinetool
370
MO✨ Outstanding Accessibility for Service! ✨
Mill-Ex is a high-speed milling machine perfectly suited to the demands of aluminum component machining. It features dual spindles, each independently driven along all three axes, with acceleration up to 1.5G, high feed rates, and a low cost per part. Turnkey solutions with complete production cells are available — All From One Source!
✔️ Two spindle configurations
✔️ Low cost per part
✔️ Low cost of ownership
✔️ High dynamics
✔️ Max part size: 100 inches (2,500 mm), width and height depending on operation
✔️ Up to 1.5G acceleration and high feed rates
#modig #modigmachinetool #machinetoolbuilder #cncmachine #4axis #machining #aluminum #automotive #aerospace #electronics #innovation #completeproductioncells #automationsystems #AllFromOneSource
@modigmachinetool
283
TRTRIMILL VFC 3021 | Immediate delivery available ⚙️
A compact 5-axis portal milling machine with a fixed table, built around a single-piece MONOBLOCK U-shaped UHPC base (anchored directly to a flat shop floor).
Highlights:
• fork-type milling head with 2 rotary axes
• 5-axis positioning or simultaneous machining
• optional independent removable rotary table
• travels: X 3,000 | Y 2,100 | Z 1,200 mm
Want it on your shop floor quickly? Message us.
@trimill_machine_tools
64
FFVMX-760 IN STOCK – NO TARIFFS – AVAILABLE FOR IMMEDIATE DELIVERY
**Limited availability – First come, first serve!
The VMX-760 is an extremely cost effective and durable high-speed machining center that will boost your productivity. Built with industry leading and proven core components from global suppliers, the new FFG VMX Series delivers consistent and reliable performance with low maintenance costs.
Standard features of #FFG's VMX-760 include:
• Fanuc 0iMF PLUS with 10.4" LCD - including Manual Guide I, Fine Surface Machining, AICCII, & 8 M Functions
• Fanuc Spindle & Axis Motors
• 25 HP
• Spindle taper: CAT-40 dual contact
• Rapid traverse: X/Y/Z - 48/48/32 m/min
• Tool Magazine: 24 Tools Arm Type ATC
Contact to learn more:
- Gerald Turner at gerald.turner@mag-ias.com or call (248) 496-8912
- Michael Judge at michael.judge@mag-ias.com or call (616) 340-3140
#Milling #VMX #FEELER #Machining
@ffgamericas
10
FFMCV-1300i IN STOCK – NO TARIFFS – READY FOR IMMEDIATE DELIVERY
**Limited availability — first come, first serve!
We also have the MCV-1500i and MCV-1500i Plus in stock!
Built with decades of expertise and advanced engineering, the MCV-1300i is designed to boost productivity through enhanced technical performance and reliable machining power.
Standard features of #FFG's MCV-1300i include:
• 50 Taper, Boxway on All Three Axes
• FANUC 0i MF Plus 15” HMI LCD Monitor
• 34 HP FANUC Spindle Motor w/ 2-Speed Gear Box
• 10,000 RPM Spindle Speed W/Spindle Chiller
• 64 Bit Micro Processor
• 32 Tools Swing Arm ATC
Click here to learn more: https://ffg-americas.com/
Contact to learn more:
- Gerald Turner at gerald.turner@mag-ias.com or call (248) 496-8912
- Michael Judge at michael.judge@mag-ias.com or call (616) 340-3140
#Machining #LEADWELL #HighPerformance #VMC
@ffgamericas
487
MIA complete process handled in a single cycle.
MEGA 30VT runs a three station setup
left for dovetail cutting
center for multi side machining
right for final finishing
The workflow moves from one position to the next,
keeping production continuous from start to finish.
One cycle in, one finished part out.
Live at Booth E0412
March 25 to 28
See you there.
#tmts2026
@microdynamicsfa
8.3K
HAHow do you keep precision consistent across 20 machines every single day?
At Berg & Co. GmbH Spanntechnik in Bielefeld, repeatability is a must, because tolerances are tight when machining parts for medical technology and the energy sector. With the HAIMER Microset VIO linear, tools are preset to run reliably and reproducibly on the machining centers.
And thanks to versatile interfaces, e.g. to COSCOM, the next step toward automation is already built in.
Already got your own HAIMER presetter?
#haimer #qualitywins #toolroomofthefuture #haimermicroset #presettingtechnology
@haimer.group
66
FFU-1000 High Performance 5-Axis Universal Machining Center
**Limited availability – First come, first serve!
The high-rigidity design of the U-1000 delivers maximum machining performance. With its integrated back-wall structure, this five-axis vertical-horizontal machining center reduces overall weight while achieving exceptional rigidity—resulting in superior quality, enhanced stability, and precision that surpasses comparable models.
Standard features of #FFG's U-1000 include:
- @siemens_usa 840Dsl Controller
- 19” TFT Monitor
- ATC 60 Tools
- Linear Scale on X/ Y/ Z Axis
- 8,000 rpm Motorized Spindle
- Powerful 73 HP (54.2 kW) - Max
Contact to learn more:
- Gerald Turner at gerald.turner@mag-ias.com or call (248) 496-8912
- Michael Judge at michael.judge@mag-ias.com or call (616) 340-3140
#Machining #5axis #HMC #HighPerformance
@ffgamericas
170
HAWith nearly 20 years at Haumiller, Ivan Colon shares his journey from apprentice to Machining Manager. Discover how we invest in our workforce to build a team of highly skilled programmers and machinists dedicated to your success.
#AutomationEngineering #ManufacturingExcellence #EngineeringCulture #CustomAutomation #HighVolumeAssembly
@haumillerengineering
574
MOTo ensure maximum reliability and efficiency, every #tool #changer undergoes dedicated test runs. On average, we run each machine for a two hours tool‑changing performance and long‑term stability test.
How many tool changes are you running in your process?
#modig #modigmachinetool #hhv #extrusionmachining #toolchanger #turnkey #turnkeysolutions #completeproductioncells
@modigmachinetool
✨ Руководство по #Millturn
Instagram содержит thousands of публикаций под #Millturn, создавая одну из самых ярких визуальных экосистем платформы.
Огромная коллекция #Millturn в Instagram представляет самые привлекательные видео сегодня. Контент от @haimer.group, @modigmachinetool and @trimill_machine_tools и других креативных производителей достиг thousands of публикаций по всему миру.
Что в тренде в #Millturn? Самые просматриваемые видео Reels и вирусный контент представлены выше.
Популярные Категории
📹 Видео-тренды: Откройте для себя последние Reels и вирусные видео
📈 Стратегия хэштегов: Изучите трендовые варианты хэштегов для вашего контента
🌟 Избранные Создатели: @haimer.group, @modigmachinetool, @trimill_machine_tools и другие ведут сообщество
Часто задаваемые вопросы о #Millturn
С помощью Pictame вы можете просматривать все реелы и видео #Millturn без входа в Instagram. Учетная запись не требуется, ваша активность остается приватной.
Анализ Эффективности
Анализ 12 роликов
💡 Лучшие посты получают в среднем 2.5K просмотров (в 2.6x раз выше среднего)
Публикуйте регулярно 3-5 раз/неделю в активные часы
Советы по Созданию Контента и Стратегия
🔥 #Millturn показывает высокий потенциал вовлечения - публикуйте стратегически в пиковые часы
✍️ Подробные подписи с историей работают хорошо - средняя длина 606 символов
📹 Вертикальные видео высокого качества (9:16) лучше всего работают для #Millturn - используйте хорошее освещение и четкий звук
Популярные поиски по #Millturn
🎬Для Любителей Видео
Millturn ReelsСмотреть Millturn Видео
📈Для Ищущих Стратегию
Millturn Трендовые ХэштегиЛучшие Millturn Хэштеги
🌟Исследовать Больше
Исследовать Millturn